Aluminium Alloy Uav Connecting Parts

As the use of computer to replace the original hardware logic circuit composed of CNC device, so that the input data storage, processing, operation, logic judgment and other control functions, can be completed through computer software. Numerical control technology is an important part of manufacturing informatization.

NC machining center programming related safety considerations

The following is a summary of some CNC machining center programming related to safety precautions, warning: once some instructions are wrong, there will be significant consequences and losses.

1. Torque limit skipping

Make sure that the torque limit is set to valid before attempting to perform the torque limit skipping. If a torque limit skip is specified when the torque limit fails, the move command is executed without a skip.

2. Non-linear interpolation positioning

When non-linear interpolation positioning is used (i.e., non-linear motion positioning between the starting point and the end point), the tool path must be carefully confirmed before programming. Since the positioning is carried out under rapid movement, if the tool and the workpiece contact, it will damage the tool, machine tool and the workpiece.

3. Rotation axis action function

Normal direction control procedures, should pay special attention to the speed of the rotation axis. Program is not suitable, will make the rotation axis speed becomes too fast, or due to the workpiece installation method is improper, the workpiece due to centrifugal force and fall off. This can damage tools, machine tools and workpieces.

• 

  The Cabin Seat Connection Parts

• 

  Sheet Metal Processing

• 

  Four Axis Processing

• 

  CNC Machining Powder Spraying

• 

  Medical Device Amplifier

• 

  Medical Device the Stethoscope